A flat or leaky car tire can occur suddenly when driving. For this reason, the basic technique of tire replacement should be owned by all drivers so that they can immediately take emergency measures when it happens on the road. Especially, if you do the range rover hire .
Indeed, tire replacement is a tiring process and also takes a long time so it will increase travel time when driving. However, if you already understand the technique, the tire replacement process will be easier.
You can see the basic techniques of tire replacement below and may be able to help you when you need it.
1. Position the car in a flat place
First, choose a flat surface so the car has a good balance when lifted with a jack. Then, make sure the place is not slippery to maintain safety when changing tires.
Do not forget to install a safety triangle when you are about to start a car tire replacement. This is to notify other vehicles that you are an emergency stop.
2. Position the transmission in P or R
After that, position the transmission lever in position P (parking) for cars that are transmitting automatically or position R (backward) for manual transmission cars to hold the tire from moving while removing the tire bolts.
During the tire replacement process, make sure all passengers get off the car so that the load does not increase, and also turn off the engine.
3. Check the condition of the spare tire
Next, remove the spare tire from the trunk or the storage area. Also check the condition of the spare tire, especially the wind pressure. However, just in case, it’s better to do this before driving.
4. Position the head of the jack with a fulcrum
Then, position the head of the jack at the fulcrum of the car. Directions for the position of the fulcrum jack can be seen in the car’s manual. Usually, in mass production cars, the fulcrum is determined from the factory and is shaped as a hollow or hole that becomes a pair of jack heads so that it will hold tight when the car is lifted.
5. Open all tire bolts
After the car is lifted, remove the tire bolts that have been loosened earlier. Be careful when lowering the tire from the stand because the tire is quite heavy. Then, install a spare tire. Ensure that the installed tire position is correct and not tilted.
The most important thing is to do the tire replacement process in a safe place even in an emergency because it involves your safety and security.